[phpBB Debug] PHP Notice: in file /viewtopic.php on line 981: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 981: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4183: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3493)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4185: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3493)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4186: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3493)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4187: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3493)
NEOGLOW • View topic - Project I by Neoglow Designs (Completed)

Project I by Neoglow Designs (Completed)

Ours build logs for customers and friends. Watch out this section to see our work.

Project I by Neoglow Designs (Completed)

Postby Neo » Mon Jan 07, 2013 9:00 am

Toyota Innova an all purpose MUV/SUV is going get a simple yet special upgrade


Specialty of this install!
3 way upfront component setup
Custom Dual 10 inch subs in fiberglass enclosure
Amp rack integrated to the custom fiberglass enclosure

The items
OEM Head unit
NEOGLOW 4 AWG Power wire, fuse block and distribution block
Dynamat sound proofing with Neoglow Designs Installation Techniques

Focal Polyglass VR3 front components
Focal 165CVX rear coaxials
Focal FPP 4100 4 channel amplifier
Focal FPP 1000 mono amplifier
Focal P 25DB x 2 subwoofer

Neoglow Designs Custom Ported enclosure

The white Toyota Innova

Image


Image


Image


Image
The project!


Image



The Focal Polyglass 165VR3 Kit

Image


The doors getting some Dynamat Love

Image

The trunk Lid reinforced with Dynamat

Image


Front Door completed!

Image


Focal Polyglass VR3 Mid bass driver installed

Image


Focal Polyglass 165CVX the standard rear speakers for most medium to advanced projects these days

Image


Image


Planning on the Mid range and Tweeters on the A pillar

Image


The Focal FPP 4100 and FPP 1000, same size so idea for custom installs!

Image


The enclosure under build

Image


Image

Image

More updates coming soon!
Neo
Site Admin
 
Posts: 561
Joined: Sat Dec 26, 2009 2:44 am
Location: Abu Dhabi

Re: Project I by Neoglow Designs

Postby Neo » Wed Jan 09, 2013 12:47 am

Top part glassed and fitment tested!

Image


Image


Image


Image

Next comes amp rack cover panel

Image


Image


What to do with the 3 way up front?

Image


Image


Mock up - but that wont work! We changed that plan

Image


This is what happened in the end!

Image


Image


Image


Door pads are installed! Front wiring still pending

Image


Since the fiberglass is taking up time I went ahead and completed the wiring under hood

Image


Big 2 upgrade was done!

A perfect place to pickup engine ground!

Image


Image


Wired like OEM! Cant differentiate!
Image


Nothing is better than adding additional ground to existing factory ground wire on the battery!

Always noticed improvement in vehicle electrical and electronics!

Image


Image


Nice place to install the fuse block and also a fine place to tap body ground on factory nut!

Image


Image
Neo
Site Admin
 
Posts: 561
Joined: Sat Dec 26, 2009 2:44 am
Location: Abu Dhabi

Re: Project I by Neoglow Designs

Postby Neo » Sat Jan 12, 2013 11:43 am

Since installation is going to take a while and we are behind schedule, decided to break in the subs a little bit.

Image

Enclosure will get a new amp rack

Image


Image


Image


Image

Image


Image

Resin laid and partially dried! Test fitting!

Image


Image


Additional layers of resin added before glassing

Image

Image

Later on we will have the finished A pillar!
Neo
Site Admin
 
Posts: 561
Joined: Sat Dec 26, 2009 2:44 am
Location: Abu Dhabi

Re: Project I by Neoglow Designs

Postby Neo » Tue Jan 15, 2013 11:35 pm

You tube video of the sub break in and base tuning!

http://youtu.be/OgwEDKDJzd0
Neo
Site Admin
 
Posts: 561
Joined: Sat Dec 26, 2009 2:44 am
Location: Abu Dhabi

Re: Project I by Neoglow Designs

Postby Neo » Tue Jan 15, 2013 11:41 pm

Sanded, bondo and primer!

Image

Image

Image

Image

Image


Painted to match the interior

Image

Image


Finally the box in the trunk with amps and subs on it!

Image

Image

Image

Image

Image

Image

Image
Neo
Site Admin
 
Posts: 561
Joined: Sat Dec 26, 2009 2:44 am
Location: Abu Dhabi

Re: Project I by Neoglow Designs

Postby Neo » Tue Jan 15, 2013 11:46 pm

Amp cover placed! And completed!

Image

Image

Image

Image

Image

Image

Image


The A pillar with the 3 way setup!

Image


Image


Image


Image


Image


Image


Just before leaving after all the testing!

Image


Image



Image



Image


Image



Image



Image



Image
Neo
Site Admin
 
Posts: 561
Joined: Sat Dec 26, 2009 2:44 am
Location: Abu Dhabi

Re: Project I by Neoglow Designs (Completed)

Postby Neo » Tue Jan 15, 2013 11:53 pm

Installation completed Video!

http://youtu.be/mFnrWNdBGh4
Neo
Site Admin
 
Posts: 561
Joined: Sat Dec 26, 2009 2:44 am
Location: Abu Dhabi


Return to Neoglow's Build Logs

Who is online

Users browsing this forum: No registered users and 1 guest

cron